User Manual: Installation and Setup: Install the battery into the device and use the RCA charging cable to activate the battery for the first time before using the device. Avoid reversing the +/- terminals of the battery. During use, if you need to remove and install the battery, use the...
Install the battery into the device and use the RCA charging cable to activate the battery for the first time before using the device.
Avoid reversing the +/- terminals of the battery.
During use, if you need to remove and install the battery, use the RCA charging cable to activate the power to ensure safety and battery longevity.
The ink stirrer does not use magnetic magnets but only uses standard specified stainless steel balls to ensure medical hygiene safety.
Control Buttons:
Power Button: Start the device.
Mode Button: Switch between continuous operation mode and power-saving mode.
Charging Port: Use RCA jack and TYPE-C jack to charge the battery.
Battery Compartment: Area for removing and installing the 18650 battery.
Charging Modes:
Using RCA - TYPE-C Jack to Charge the Battery:
Connect the RCA - Type-C cable to a 5V dock to charge the battery.
Using a Tattoo Power Supply to Charge the Battery:
Use a tattoo transformer to adjust the voltage from 4.5V - 5V.
The stirring speed can be adjusted fast or slow according to the voltage from 3.5V-5V.
Full battery charging time is about 4 hours.
Voltage below 3.5V or higher than 6V will cause the battery capacity display to turn off, indicating undercurrent or overcurrent. The device will automatically cut off the power and will not charge to protect the battery.
Charging Notes:
During charging, the LED display will show the battery capacity. When the battery is fully charged, the screen will automatically turn off.
Press the Mode button to turn the LED battery capacity display on/off.
When the battery is low, the device will emit a continuous sound signal indicating that the battery needs to be charged.
Power-Saving Mode:
The device will start in default continuous operation mode.
In continuous mode, the device operates for about 6 hours when fully charged.
Press and hold the Mode button for 3 seconds to activate the power-saving mode (the device will rest for 1 minute and operate for 1 minute).
In power-saving mode, the operating time can be up to 15 hours when the battery is fully charged.
"Artfly Ink Mixer 20 Cups: The fully upgraded version now uses medical-grade stainless steel balls instead of magnets. The machine has an extremely powerful vortex force, capable of easily mixing thin or thick tattoo ink solutions with just one ball."
Package Includes:
Ink Mixer 20 Cup
RCA to TYPE-C Charging Cable
14mm Ink cup Positioning Tray
17mm Ink cup Positioning Tray
Please noted that battery 18650 you can buy by yourself if you need to use battery .
We hope you use the product effectively and are satisfied with it!
